This little amount will definitely add up over time. For the user running his machine at 100% constantly, will likely be shaving a few dollars a month off the power bill. This is important for two reasons one, a more efficient power supply will draw less current, meaning your computer will use less power. For instance, if you had a computer PSU that was rated at 400W, and is pulling 500W from the wall, then that PSU is 80% efficient. So what is PSU efficiency and why would anyone care how efficient a power supply is? Without getting into too much detail, efficiency in this sense is basically power in (from the wall) vs power out (to computer components). The Silencer MK III series is rated at an outstanding 92% efficiency under a typical load. From the cars we drive, to the battery life of our phones, efficiency plays a huge role in the every day decisions we make. A rating like this separates the boys from the men in the world of PSUs. This leads us to believe that the parts used in this unit are rated much higher than what this PSU will ever need.Īt a glance, this looks like a pretty solid power supply, which will undoubtedly test well, but before we get into testing, lets take a closer look at its specs…Īs we mentioned on the previous page, the Silencer MK III holds an 80 Plus Platinum efficiency rating. Another noteworthy feature is is that at maximum load, the MK III 1200W will maintain a maximum temperature of only 50 degrees C. According to PC Power & Cooling, this power supply is 92% efficient which earns it an 80-Plus Platinum rating which is the highest level a power supply can achieve. This particular model combines a high power output with an exceptional efficiency rating. Other variations include the 400W, 500W, and 600W. In this review we will be taking a look at the 1200W model which is the highest output rated model of the MK III family. If you are one of these people, looking for a power supply that not only can provide massive amounts of power to your components, but will do it reliably and efficiently, then look no further than the Silencer MK III from PC Power & Cooling which is what we will be reviewing today. Users know that the power supply is probably the most important component in their system, and many are willing to buy the best of the best. Our system also has 2 x 120mm fans connected to it.Īll voltages were read by a Digital Multimeter that was purchased at Radio Shack.In the world of computer power supplies, it seems that all the big name companies like PC Power & Cooling are constantly pushing the limit when it comes to performance. We also raised the other available voltages on the board to the middle of available settings. DDR was kept at DDR800 speeds and 4-4-4-12, but we raised the vdimm to 2.4v to stress the system even more. Our overclocked settings on our Asus p5ne-sli were a fsb of 401, with a CPU mulitplier of 9, using a vcore of 1.5. For this review, stability was determined by running our battery of tests, plus the ability to complete a SuperPi 32mb test run.įor our voltage readings at default settings, we ran everything at stock speeds, and DDR settings settings of DDR800 and 4-4-4-12, at 2.0v. The video card was left at default timings as well for all tests. Timings for our overclocking were left 4-4-4-12 and 2.0v, but the ram divider was set to the lowest possible to take any ram issues out of the CPU overclocking. ![]() Our stock speed testing used Corsair DDR2 C6400C4 2 GB kit at 2.0 vDimm at DDR2 800. ![]() For our stock speed tests, we ran everything at default timings for the CPU. All tests were run using a clean install of Windows XP Professional with SP2.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |